Product introduction

FT33 is based on Feiteng Tengrui D2000+ZX100 design solution. The CompactPCI 3U architecture complies with PICMG2.0R3.0 and motherboard standards. It has rich peripheral interfaces and designed an efficient heat dissipation system, which can significantly improve the floating point computing performance of the processor and support high-bandwidth data transmission.

FT33 complies with the compact and space-saving characteristics of the Compactpci platform and integrates most of the functions of a PC.

Functional components. Including onboard DDR3 memory capacity of ECC 4GB memory, integrated with a 32/64-bit PCI

Express-to-pci/pci-x bridge can connect up to 5 CPCI peripheral slots according to the peripheral frequency, and the bus meets PCIMG2.0 32bit/33MHZ (can support 32bit/66MHZ).

In terms of network communication, FT33 integrates 3-way WX1860AL4 Gigabit Ethernet card and supports CPCI

According to the PICMG2.16 specification, the RJ45 interface of LAN3 is provided on the front panel, which can be used directly by network equipment for user convenience; among them, LAN1 and LAN2 are connected at the rear; WX1860AL4 Gigabit Ethernet card can be connected through the rear connector J2.

The USB interface of FT33 supports 7 USB interfaces, 1 USB2.0 interface and 1 USB3.0 interface on the front panel.

Four USB interfaces are led out through the CPCI slot J2, and one USB2.0 interface signal is led out through the CN1 slot.

FT33 has an onboard 50pin SATA interface that can connect SSD electronic hard disk and two SATA devices (rear outlet);

Connect 1 SATA hard drive through the CN1 interface.

FT33 supports 4 serial ports:

The last two COM1-2 are led out through J2, supporting RS232/422/485.

1 serial port on the front

Lead 1 serial port COM4 TTL RS232 through J2

FT33 IO interface:

The front IO interface of FT33 is: 1 DP display interface, 1 network interface, 1 serial port. USB2.0

is 1, USB3.0 is 1,

The IO interfaces expanded by FT33 through the CN1 interface are: 1 USB2.0 interface, 1 SATA interface,

The FT33 3U CPCI board design complies with the PICMG2.0 Rev 3.0/PICMG2.16 specification.

Environmental and mechanical dimensions

Working environment temperature:

0℃~60℃

-40℃ - +65℃ (optional)

Humidity:

5%~90% (non-condensing state);

Storage ambient temperature:

-40℃ - +75℃ Humidity:

5%~90% (non-condensing state);

Size: 160.0mm×100.0mm

Processor (CPU)

Feiteng Tengrui D2000 is a high-performance general-purpose processor for desktop applications. It integrates eight new-generation high-performance processor cores FTC663 independently developed by Feiteng. It adopts an out-of-order four-issue superscalar pipeline, is compatible with the 64-bit ARMV8 instruction set, and supports both ARM64 and ARM32 execution modes;

Maximum main frequency 2.6GHz; supports single-precision and double-precision floating-point arithmetic instructions and ASIMD processing instructions

order; supports hardware virtualization; integrates system-level security mechanisms to meet performance requirements and security and trustworthiness requirements in complex application scenarios; supports commercial and industrial quality levels. This product is suitable for building desktop terminals, portable terminals, lightweight servers and embedded low-power products that require higher performance, energy consumption ratio and security.

Tengrui D2000 processor technical specifications:

System chipset

FT33 chooses the onboard Feiteng Rui D2000 to match the ZX100 chipset, X100 standard version:

Marking: Phytium Feiteng B997-C

Order number: X100_C

GPU frequency: 600MHz

DDR: 1×DDR4/2666

TDP[1]: 15W

Core voltage: 0.88V

Package: 31mm*31mm FCLBGA package

Thickness: 3.172mm

Quality grade: Commercial grade

MSL: <=4

ESD: >=1000V

Environmental regulations: ROHS2.0

Operating junction temperature (Tj): 0~85°C

system memory

Provides onboard DDR3 SDRAM memory chips with 4GB capacity and supports ECC function

Graphics

Support one channel of VGA (rear outlet), one channel of DVI (rear outlet), support one channel of DP (front outlet)

Network function (LAN)

10/100/1000M Base-T Fast Ethernet LAN (WX1860AL4 network chip) LAN 2 rear outlet

LAN 1 front panel RJ45 interface

audio function

Support HDA, support MIC-in/Line-in/Line-out function.

storage

There is an onboard 50pin SATA interface that can connect SSD electronic hard disk and two SATA devices (rear outlet);

Connect a SATA electronic hard disk through the CN1 interface.

I/O interface

4X COM ports:

The last two COM1-2 are led out through J2, supporting RS232/422/485.

1 serial port on the front

Lead 1 serial port COM4 TTL RS232 through J2 (optional)

USB

Support 7 USB interfaces

There are 2 USB interfaces on the front panel (1 USB2.0, 1 USB3.0), and 4 USB interfaces are led out through CPCI slot J2

Lead out a USB interface signal through the CN1 slot

Watchdog function

2 GPIO.

Programmable selectable timeout interrupt timeout event reset system.

expansion bus

One PCIE -to-PCI bridge,

One PCE-to-PCI bridge can connect up to 5 CPCI peripheral slots according to the peripheral frequency, and the bus meets PCIMG2.0 32bit/33MHZ (can support 32bit/66MHZ).

BIOS

Phytium BIOS.

I/O module card through CN1 interface, (optional)

There is 1 USB2.0 interface and 1 SATA interface.